If you’re in need of a new footbed for your Birkenstocks, don’t fret! Replacing the footbed is a relatively easy process that only takes a few minutes. Plus, it’s an inexpensive way to extend the life of your favorite shoes.
- Unscrew the four screws on the bottom of the shoe with a Phillips screwdriver
- Remove the insole and old footbed
- Trim the new footbed to size, if necessary
- Place the new footbed in the shoe and screw the four screws back in place
Can Birkenstock Footbed Be Replaced?
Yes, the Birkenstock footbed can be replaced. The Birkenstock company produces replacement footbeds that are made to the same high standards as the original footbeds. Replacement footbeds are available in all of the same sizes and widths as the original footbeds.
They are also available in a variety of colors and materials.
How Do You Remove a Birkenstock Footbed?
If you need to remove the footbed from your Birkenstock sandals for any reason, follow these steps. With a little care, you can easily take out the footbed and put it back in without damaging your shoes.
First, find a flat surface where you can work on your sandals.
Place one sandal upside down so that the sole is facing up. Locate the two small tabs at the heel of the footbed. Gently pull on one tab while pushing down on the other with your other hand.
The footbed should pop out easily. If it doesn’t, try wiggling it a bit until it comes loose.
To reinsert the footbed, line up the two tabs at the heel with the slots in the sole of the sandal.
Gently push down on one side of the footbed until it pops into place. Repeat with the other side. That’s all there is to it!
How Do You Refresh a Birkenstock Footbed?
If you’re like most people, your Birkenstocks are probably some of the most comfortable shoes you own. But after a while, even the best shoes can start to feel a little worn out and in need of some TLC. Luckily, refreshing your Birkenstock footbed is a easy way to make them feel like new again!
Here’s what you’ll need:
– A soft cloth or brush
– White vinegar
– Warm water
– Baking soda (optional)
Start by removing any dirt or debris from the surface of the footbeds with a soft cloth or brush.
If they’re particularly dirty, you can also use a mild soap and warm water to clean them. Once they’re clean, mix together equal parts white vinegar and warm water in a bowl.
Soak a cloth in the mixture and wring it out so it’s not dripping wet.
Wipe down the entire surface of each footbed with the damp cloth. You should see the dirt and stains start to lift away. If you have any stubborn stains, you can sprinkle baking soda on them and scrub with a toothbrush before wiping away with the vinegar solution.
Once you’re satisfied that all the dirt and grime is gone, rinse off each footbed with clean water. Allow them to air dry completely before wearing again. And that’s it!
How Much Does It Cost to Recork Birkenstocks?
Assuming you are referring to the popular sandal company, Birkenstock, it would cost you $30 to recork their shoes. This price includes shipping and handling and is for their standard cork footbeds. If you have their more premium models, such as those with suede or leather footbeds, the price goes up to $40.
Birkenstock Footbed Replacement Process
Birkenstock Replacement Parts
If your Birkenstocks are in need of a little TLC, never fear! You can easily find replacement parts to keep your favorite sandals in tip-top shape. Here’s a quick guide to what’s available:
Footbeds: If your footbeds are worn down, you can replace them with new ones. Simply remove the old footbeds and insert the new ones – no glue or special tools required.
Buckles & Straps: If a strap or buckle breaks, you can purchase replacements at most Birkenstock retailers.
Just make sure to get the right size for your sandals.
Soles: Worn-out soles can be replaced with new ones, available both from Birkenstock and many third-party retailers. Again, make sure to get the correct size.
Toe Posts & Heels: These small parts can also be replaced if needed. Check with your local Birkenstock retailer for availability.
With these easy-to-find replacement parts, you can keep your Birkenstocks looking and feeling great for years to come!
Birkenstock Repair
If your Birkenstocks are in need of repair, there are a few options available to you. You can send them back to the factory for repairs, or you can take them to a local cobbler or shoe repair shop.
Factory Repairs
If you choose to send your Birkenstocks back to the factory for repairs, the process is simple. First, you’ll need to fill out a repair form on the Birkenstock website. Once the form is complete, you’ll be given a return authorization number and shipping instructions.Pack your Birkenstocks securely and ship them off to the factory.
The turnaround time for repairs is typically 4-6 weeks.
Local Repairs
If you’d prefer to have your Birkenstocks repaired locally, there are a few things to keep in mind.
First, not all cobblers and shoe repair shops are equipped to handle Birkenstock repairs. It’s best to call ahead and make sure that the shop you’re planning on visiting can accommodate your needs. Secondly, local repairs will likely be more expensive than factory repairs – so be prepared to pay a bit more for this service.
No matter which route you choose,Birkenstock repairs are relatively easy and straightforward. And with proper care and maintenance, your beloved Birks will last for many years to come!
Birkenstock Resole Kit
If you’re like most people, your Birkenstocks are probably one of your favorite pairs of shoes. They’re comfortable, they go with everything, and they last forever. But eventually, even the best shoes need a little TLC.
That’s where the Birkenstock Resole Kit comes in.
Plus, it comes with easy-to-follow instructions so you can do the job yourself. The best part about the Birkenstock Resole Kit is that it’s affordable. It’s a fraction of the cost of buying new shoes, and it will extend the life of your beloved Birkenstocks by years.
So if you’re looking for a way to keep your favorite shoes around for a long time, this is the perfect solution.
Birkenstock Footbed Replacement near Me
If you’re in need of a Birkenstock footbed replacement, there are a few things you should keep in mind. First, Birkenstocks are not made to be replaced- the company recommends that you buy a new pair of shoes when your old ones start to wear out. However, if you’re determined to replace your Birkenstock footbeds, there are a few places you can go.
One option is to order a replacement footbed from the Birkenstock website. This is probably the easiest option, but it can be expensive-footbeds cost around $60 each. If you have multiple pairs of Birkenstocks, this can quickly become costly.
Another option is to find a cobbler or shoe repair shop that specializes in Birkenstocks. This can be tricky- not all cobblers will be familiar with the construction of Birkenstocks and may not know how to properly replace the footbeds. Once you find a cobbler that’s up for the task, they should be able to replace your footbeds for much less than what Birkenstock charges.
Finally, if you’re feeling handy, you could try replacing your own footbeds. This is definitely the most challenging option, but it’s also the most rewarding (and cheapest!). There are plenty of tutorials online that can walk you through the process step-by-step.
Just make sure you do your research before taking on such a project!
Conclusion
If you’re in need of a new footbed for your Birkenstocks, never fear! This process is actually quite simple. All you’ll need is a Phillips head screwdriver, a small hammer, and some replacement footbeds (which can be found easily online).
With these supplies in hand, follow these steps:
1. First, remove the screws from the bottom of your sandals using the screwdriver. There should be four screws total – two on each sandal.
2. Once the screws are removed, gently pry off the old footbeds using the flat end of your screwdriver or a similar tool. Be careful not to damage the straps or other parts of your sandals as you do this.
3. Next, insert the new footbeds into place and use the small hammer to lightly tap them into place if needed.
Make sure they’re seated correctly before proceeding.
4. Finally, replace the screws and tighten them securely with your screwdriver. And that’s it – you’re all done!
