If you’re looking to replace the parking brake shoe on your Ford van, this guide is for you. Here, we’ll provide a step-by-step overview of the entire replacement process, so you’ll know exactly what to do. Whether you’re a novice or experienced mechanic, you’ll be able to complete the job quickly and easily. So let’s get started!
Replacing Parking Brake Shoes on a Ford Van:
To replace the parking brake shoes on a Ford Van, you will need a few basic tools. First, you’ll need a jack and jack stands, a pair of pliers, a flat head screwdriver, and a ratchet set.
Once you have all of your tools, it’s time to begin. First, use the jack and jack stands to raise and support the rear of the van. Make sure to use the jack stands for safety.
Next, find the parking brake shoes. Remove the old shoes, and install the new ones with the pliers. Make sure the new shoes are securely in place.
Using the flat head screwdriver, remove the old mounting hardware from the brake drum and replace it with the new hardware.
Finally, use the ratchet set to tighten the mounting hardware.
Once you’ve completed these steps, your parking brake shoes are successfully replaced.
How to Replace Parking Brake Shoes on Ford Van?
Replacing the parking brake shoe on your Ford Van is an easy task that can be done in a few simple steps. This job typically takes about an hour and requires basic hand tools to complete. The following steps will guide you through the process of replacing the parking brake shoe, including removing the old shoe and installing the new one.
Tools and Materials Needed:
- Replacement Parking Brake Shoe
- Flathead Screwdriver
- Hammer
- WD-40
Step 1: Remove Old Shoe
The first step is to remove the old shoe. Start by loosening the nuts that hold the shoe in place. Use a flathead screwdriver to loosen the nuts and remove them. Once the nuts are removed, take a hammer and tap the shoe to loosen it from the brake drum. If the shoe is stuck, spray some WD-40 on the area and allow it to sit for a few minutes. Then tap the shoe again until it comes loose.
Step 2: Install New Shoe
Once the old shoe has been removed, it is time to install the new one. Place the new shoe in the brake drum and start to tighten the nuts to secure it in place. Use the flathead screwdriver to tighten the nuts until they are secure, then move on to the next shoe.
Step 3: Test New Shoe
The final step is to test the new shoe. This can be done by pressing the parking brake and releasing it several times. If the parking brake works properly, then the job is complete. If not, then the shoe may need to be adjusted or replaced.
Following these steps will help ensure that the parking brake shoe on your Ford Van is replaced properly and safely. Doing this job yourself can save you time and money, and it is a great way to keep your vehicle in top condition.
Top 6 Frequently Asked Questions
Q1: How do I remove the parking brake shoe on a Ford van?
Answer: To remove the parking brake shoe on a Ford van, first you need to lift the vehicle and secure it on jack stands. Then, remove the rear wheels, calipers, and brake drums. You will then see the parking brake shoe which you can remove by unscrewing the two adjuster screws, then the shoe retractor spring, and the parking brake shoe itself. Once the shoe is off, you need to disconnect the brake cable from the shoe, and then remove the shoe from the vehicle.
Q2: What tools do I need to replace the parking brake shoe on a Ford van?
Answer: To replace the parking brake shoe on a Ford van, you will need a few basic tools such as a jack, jack stands, and a lug wrench. You will also need a flathead screwdriver, a pair of pliers, and a brake tool to help remove the calipers, brake drums, and parking brake shoe.
Q3: How do I install a new parking brake shoe on a Ford van?
Answer: To install a new parking brake shoe on a Ford van, first you need to position the parking brake shoe on the spindle and secure it in place with the two adjuster screws. Then, reattach the brake cable to the shoe. Next, connect the shoe retractor spring and the parking brake shoe itself. Once the shoe is in place, reattach the brake drums, calipers, and rear wheels. Finally, lower the vehicle and test the parking brake before driving.
Q4: What should I do if the parking brake is not working on my Ford van?
Answer: If the parking brake is not working on your Ford van, first check the parking brake cable to ensure it is connected properly and not damaged. If the cable is in good condition, then likely the parking brake shoes need to be replaced. Check the brake shoes for signs of wear or damage and replace them if necessary.
Q5: What are the common signs that my Ford van’s parking brake shoes need to be replaced?
Answer: The common signs that your Ford van’s parking brake shoes need to be replaced include difficulty releasing the parking brake, squeaking or grinding noises when applying the brake, and excessive wear on the brake shoes. Additionally, if your vehicle is taking longer to stop when the brake is applied, that could be a sign that the shoes need to be replaced.
Q6: How often should I check my Ford van’s parking brake shoes?
Answer: It is important to regularly check your Ford van’s parking brake shoes for signs of wear or damage. It is recommended to check the parking brake shoes every 15,000 to 20,000 miles or every 6 to 12 months, whichever comes first. Additionally, if you notice any of the common signs that the shoes need to be replaced, then it is best to replace them as soon as possible.
Replacing a parking brake shoe on a Ford van is a straightforward process that takes minimal tools and a few hours of your time. With the right instructions, you can easily replace the parking brake shoes on your Ford van in no time and be back on the road in no time. By replacing the parking brake shoes, you can ensure that your Ford van has the best possible stopping power and reliability for years to come. Ultimately, replacing the parking brake shoes on your Ford van is a great way to save money, time, and improve your safety on the roads.
