How to Resole Climbing Shoes?

Climbing shoes are one of the most important pieces of equipment for a climber. They are what keep you attached to the rock, and they need to be comfortable enough to wear all day. Unfortunately, they also tend to wear out quickly and can be expensive to replace.

Here are some tips on how to extend the life of your climbing shoes and make them last longer. 1) Store them properly- When you’re not wearing your shoes, store them in a cool, dry place out of direct sunlight. This will help prevent the rubber from drying out and cracking.

2) Don’t leave them in your car- The heat inside your car can cause the rubber to degrade much faster than normal. If you must leave them in your car, put them in a bag so they’re not directly exposed to the sun. 3) Don’t walk around on pavement- Walking on hard surfaces like pavement will wear down the soles of your shoes much faster than if you stick to softer surfaces like dirt or grass.

Try to avoid walking on concrete as much as possible. 4) Clean them regularly- After each session, clean your shoes with a brush and mild soap (dish soap works well). This will remove any dirt or grime that could potentially damage the rubber over time.

  • Inspect your shoes for any obvious damage, such as tears in the fabric or missing pieces of rubber
  • If your shoes are wet, allow them to dry completely before attempting to resolve them
  • If your shoes are dirty, clean them with a soft brush and mild soap
  • Rinse thoroughly and allow them to dry completely
  • Use a shoe tree or stuffing to help retain the shape of your shoes while they’re drying
  • This will also help prevent creases from forming
  • Place your shoes in a warm room or in direct sunlight to help speed up the drying process

Resoling a climbing shoe

Can You Resole Climbing Shoes Yourself?

It’s no secret that climbing shoes can be expensive. A good pair of shoes can last you several years with proper care, but sometimes they just need a little bit of TLC to keep them going. Whether it’s a hole in the toe, worn down rubber, or just general wear and tear, there are plenty of reasons why you might need to resoles your shoes.

But can you do it yourself? The answer is… maybe. It depends on the type of shoe and the severity of the damage.

If you have a relatively new pair of shoes with minor damage, then chances are you can fix them up yourself. However, if your shoes are older or the damage is more severe, then it’s probably best to leave it to a professional. There are plenty of DIY tutorials out there on how to resoles your own shoes, but we wouldn’t recommend trying it unless you’re confident in your abilities (and even then, only attempt it on an old pair of shoes that you don’t mind ruining).

If you decide to go for it anyway, make sure you do your research and have all the necessary supplies before starting. And as always, safety first!

How Much Does a Resole Cost Climbing Shoes?

When it comes to the cost of getting your climbing shoes resoled, there are a few things to take into consideration. The first is the type of sole that you have on your shoes. If you have a standard rubber sole, then the cost will be lower than if you have a specialty sole such as Vibram or Kletterwerks.

The second thing to consider is the size of your shoe. A smaller shoe will generally cost less to resole than a larger one. And finally, the condition of your shoe will also affect the price.

If your shoe is in good condition, then the cobbler will be able to simply buff out any existing wear and tear and apply a new layer of rubber. However, if your shoe is excessively worn or has damaged threading, then the cobbler may need to do some patching or other repairs before applying the new sole.

You Can Read:  How to Wash Tennis Shoes?
So how much does all this add up to?

Generally speaking, you can expect to pay anywhere from $30-$60 for a full resole job on a pair of climbing shoes. Of course, this price can vary depending on factors like those mentioned above, but it gives you a general idea of what you can expect to pay.

Does Rei Resole Climbing Shoes?

Yes, REI does resole climbing shoes. The process typically takes 1-2 weeks and costs $30-$40, depending on the type of shoe and the extent of the damage. REI also offers a punch repair service for $10-$15 that can extend the life of your shoes by a few months.

How Can I Fix My Climbing Shoes at Home?

Climbing shoes are one of the most important pieces of gear for a climber, and it is important to keep them in good condition. Here are some tips on how to fix your climbing shoes at home: 1. Clean your shoes regularly.

This will help prevent dirt and grime from building up and wearing down your shoes. You can use a soft brush or cloth to wipe away any dirt or debris. 2. Inspect your shoes regularly for any damage.

Look for cracks, holes, or other signs of wear and tear. If you find any damage, you can try to repair it with shoe glue or tape. 3. Store your shoes in a cool, dry place when you’re not using them.

This will help prolong their life span. Avoid storing them in direct sunlight or near heat sources, as this can cause the materials to break down prematurely.

Climbing Shoe Resole Kit

If you’re an avid climber, chances are you’ve had to resole your climbing shoes at least once. And if you’re new to the sport, you may be wondering what exactly a resoling kit is and why you need one. Here’s everything you need to know about Climbing Shoe Resole Kits!

What is a Climbing Shoe Resole Kit? A Climbing Shoe Resole Kit is a collection of supplies that you’ll need in order to successfully resole your own climbing shoes. The most important item in the kit is the rubber – this is what will give your shoes their grip back!

You’ll also need some adhesive and a few other tools, which vary depending on the type of kit. Why do I need a Climbing Shoe Resole Kit? There are two main reasons why climbers choose to resole their own shoes: first, it’s much cheaper than buying new shoes; and second, it extends the life of your favorite pair of shoes!

When done correctly, a resoling job will make your shoes feel like new again – giving you months (or even years) more use out of them. Plus, it’s a great way to learn more about shoe construction and repair – who knows, maybe you’ll even start doing resoles for other climbers one day! How do I use a Climbing Shoe Resole Kit?

The first step is to clean off any old dirt and debris from the sole of your shoe – this will help the new rubber adhere better. Next, apply the adhesive evenly across the surface that will be receiving the new rubber. Be sure to follow the manufacturer’s instructions carefully here!

Once the adhesive is in place, press the new rubber onto the sole and hold it there for several minutes until it dries. Finally, trim away any excess rubber with a sharp knife or scissors.

You Can Read:  How to Break in Basketball Shoes?

Resole Climbing Shoes California

Climbing shoes are an essential piece of gear for any climber, and Resole Climbing Shoes in California is one of the best places to get them. Located in the heart of the climbing community in Bishop, CA, Resole has been providing top-quality climbing shoes for over 20 years. With a wide selection of shoes from all the major brands, plus custom resoling services, Resole is your one-stop shop for all your climbing footwear needs.

Resole Climbing Shoes La Sportiva

When it comes to rock climbing, your shoes are one of the most important pieces of gear that you will own. They need to be comfortable, provide good traction, and be able to withstand a lot of wear and tear. La Sportiva is a company that makes some of the best climbing shoes on the market.

The Resole model is a great all-around shoe that can be used for both indoor and outdoor climbing. One of the things that makes the Resole so great is its comfort. It has a padded tongue and collar, as well as a cushioned insole.

This means that it will be comfortable even when you’re wearing it for long periods of time. The shoe also has a good level of traction, thanks to its sticky rubber sole. This will give you the confidence to know that you won’t slip while you’re climbing.

The Resole is also built to last. It has a tough leather upper that can take plenty of abuse, and the stitching is reinforced in key areas to prevent blowouts. If you take care of your shoes, they should last you several seasons before they need to be replaced.

If you’re looking for a great all-around climbing shoe, the La Sportiva Resole is an excellent choice. It’s comfortable, durable, and provides good traction – everything you need in a shoe designed for scaling cliffs!

Conclusion

Assuming you want a summary of the blog post titled “How to Resole Climbing Shoes”: If your climbing shoes are worn out, don’t worry – they can be resoled! Resoling is a process where the rubber sole of the shoe is replaced.

This is important because the rubber is what provides traction when you’re climbing. You can take your shoes to a professional to get them resoled, or you can do it yourself with some supplies from the hardware store. Here’s what you’ll need to do it yourself:

– Sandpaper – Shoe glue – A new piece of rubber that matches the size of your old sole

– A razor blade – Tape – A pencil

First, sand down the old sole until it’s smooth. Then, apply shoe glue to both the new piece of rubber and the bottom of your shoe. Be generous with the glue so that it will hold well.

Place the new piece of rubber on top of the old one and press down firmly. Wrap tape around the shoe to keep everything in place while it dries overnight. In the morning, use a razor blade to trim off any excess rubber.

Your shoes are now ready for more climbs!

About The Author

Scroll to Top